Exposure to Silica in Hydraulic Fracturing Operations
Article By Sandy Smith, Environmental Health & Safety, EHSToday.com
A new study, “Occupational Exposures to Respirable Crystalline Silica During Hydraulic Fracturing,” found respirable crystalline silica, a human lung carcinogen, to be an occupational exposure hazard for workers at hydraulic fracturing (fracking) operations. Researchers also found that the most commonly used type of respirator – the half-mask air-purifying respirator – might not provide enough protection for workers.
Field researchers from the NIOSH Western States Office (WSO) and the Division of Applied Research and Technology (DART) collected 111 personal breathing zone samples at 11 sites in five states over a 15-month period to evaluate exposures to respirable crystalline silica during fracking operations.
“Certain work in this industry requires employees to be in areas where respirable silica levels may exceed defined occupational exposure limits like the OSHA Permissible Exposure Limit or the NIOSH Recommended Exposure Limits [RELs],” said researcher Michael Breitenstein, who is with the NIOSH DART in Cincinnati. “However, our study found that in some cases, full shift personal breathing zone exposures exceeded 10 times the REL.”
Respirable silica is the portion of crystalline silica that is small enough to enter the gas-exchange regions of the lungs if inhaled and includes particles with aerodynamic diameters less than approximately 10 micrometers (μm). Occupational exposures to respirable crystalline silica are associated with the development of silicosis, lung cancer, pulmonary tuberculosis and other respiratory diseases. These exposures also may be related to the development of autoimmune disorders, chronic renal disease and other adverse health effects.
“Although half-mask, air-purifying respirators are most commonly used at hydraulic fracturing sites, due to the magnitude of the silica concentrations measured, half-masks might not be sufficiently protective,” said researcher Eric J. Esswein, of the NIOSH WSO in Denver. “In some cases, silica concentrations exceeded the maximum use concentration for that type of respirator.”
According to NIOSH, the risks of silica exposures for workers exposed at or above the REL (0.05 mg/m3) may be minimized by substituting less hazardous materials and using engineering controls to limit exposures. In cases when engineering controls are not sufficient to keep exposures below the REL, NIOSH recommends using appropriate respiratory protection, and making medical examinations available to exposed workers.
See also EcoWatch for related information.